John Deere 1590 No-Till Grain Seeders

Vendor:

John Deere

Seeders for direct seeding with minimum tillage and for traditional seeding with switched-off system of active boot penetration

The boot is fastened to the disk by a spring, which ensures precise seed distribution

Nylon reflector holds seeds on the furrow bottom

Support wheels with smooth plastic hubs minimise the impact on the ground. Steel-rimmed ones are used for direct seeding.

The rubber roll-on wheel prevents adhesion and extraction of seeds from the furrow

Model 1590 No-Till
Grip width, m  3.05 4.6 6.1
Bin type, l grain grain+fertiliser grain grain+fertiliser grain grain+fertiliser
Full bin, l 1,234 1,200 1,862 1,808 2,469 2,397
Row width, cm 19 19 19 or 25 19 or 25 19 or 25 19 or 25
Clamp pressure on boot from 75 to 204 kg, hydraulically adjusted
Disk 46cm disk with an edge bevelled at an angle of 7 degr.; fertilisers can be placed separately
Support wheels 11.4x41 cm, adjusted 6.4-89mm with a 6.4mm step
Roll-on wheels 2.5x25.4 cm rubber wheels, adjusted pressure 2.3-20.4 kg
Embedding wheels 2.5x30.4 cm wheel at a vertical angle of 20 degr., horizontal angle of 7 degr.; clamp pressure 12-19.5 kg
Full width, m 3.12 3.12 4.7 4.7 6.1 6.1
Full height, m 2.08 1.91 2.08 1.91 2.08 1.91
Full length, m 6.1 6.1 6.1 6.1 6.1 6.1
Weight, kg 2,917 2,985 3,837 3,928 5,833 5,969
Required power, hp above 85 above 85 above 125 above 125 above 150 above 150